Technology and engineering · 1985
RFC 951: Bootstrap Protocol
by W.J. Croft, J. Gilmore
This RFC describes an IP/UDP bootstrap protocol (BOOTP) which allows a diskless client machine to discover its own IP address, the address of a server host, and the name of a file to be loaded into memory and executed. The bootstrap operation can be thought of as consisting of TWO PHASES. This RFC describes the first phase, which could be labeled `address determination and bootfile selection'. After this address and filename information is obtained, control passes to the second phase of the bootstrap where a file transfer occurs. The file transfer will typically use the TFTP protocol, since it is intended that both phases reside in PROM on the client. However BOOTP could also work with other protocols such as SFTP or FTP. This RFC suggests a proposed protocol for the ARPA-Internet community, and requests discussion and suggestions for improvements.
Anyone can see what's on the shelves. Open a book with a free account, and stay in touch with its book club.
- First published
- 1985
- Status
- Draft Standard
- Pages
- 12
- Copyright
- ✓ Free to read · Copied in full, as published
Where it comes from
RFC Editor · IETF Datatracker · IETF Trust Legal Provisions
Copied in full and unchanged from the RFC Editor, with the RFC's own notices. © IETF Trust and the persons identified as the document authors. The IETF Trust allows copying and distributing an RFC in full and without modification, so Micwyn shows it exactly as published and makes no study guide, audio or other version of it.
Discuss a passage
Select any passage in the reader and press Discuss to talk about it in public.