Technology and engineering · 2006
RFC 4576: Using a Link State Advertisement (LSA) Options Bit to Prevent Looping in BGP/MPLS IP Virtual Private Networks (VPNs)
by E. Rosen, P. Psenak, P. Pillay-Esnault
This document specifies a procedure that deals with a particular issue that may arise when a Service Provider (SP) provides "BGP/MPLS IP VPN" service to a customer and the customer uses OSPFv2 to advertise its routes to the SP. In this situation, a Customer Edge (CE) Router and a Provider Edge (PE) Router are OSPF peers, and customer routes are sent via OSPFv2 from the CE to the PE. The customer routes are converted into BGP routes, and BGP carries them across the backbone to other PE routers. The routes are then converted back to OSPF routes sent via OSPF to other CE routers. As a result of this conversion, some of the information needed to prevent loops may be lost. A procedure is needed to ensure that once a route is sent from a PE to a CE, the route will be ignored by any PE that receives it back from a CE. This document specifies the necessary procedure, using one of the options bit
Anyone can see what's on the shelves. Open a book with a free account, and stay in touch with its book club.
- First published
- 2006
- Status
- Proposed Standard
- Pages
- 7
- Copyright
- ✓ Free to read · Copied in full, as published
Where it comes from
RFC Editor · IETF Datatracker · IETF Trust Legal Provisions
Copied in full and unchanged from the RFC Editor, with the RFC's own notices. © IETF Trust and the persons identified as the document authors. The IETF Trust allows copying and distributing an RFC in full and without modification, so Micwyn shows it exactly as published and makes no study guide, audio or other version of it.
Discuss a passage
Select any passage in the reader and press Discuss to talk about it in public.