Technology and engineering · 2007

RFC 5072: IP Version 6 over PPP

by S. Varada, D. Haskins, E. Allen

The Point-to-Point Protocol (PPP) provides a standard method of encapsulating network-layer protocol information over point-to-point links. PPP also defines an extensible Link Control Protocol, and proposes a family of Network Control Protocols (NCPs) for establishing and configuring different network-layer protocols. This document defines the method for sending IPv6 packets over PPP links, the NCP for establishing and configuring the IPv6 over PPP, and the method for forming IPv6 link-local addresses on PPP links. It also specifies the conditions for performing Duplicate Address Detection on IPv6 global unicast addresses configured for PPP links either through stateful or stateless address autoconfiguration. This document obsoletes RFC 2472. [STANDARDS-TRACK]

Anyone can see what's on the shelves. Open a book with a free account, and stay in touch with its book club.

First published
2007
Status
Draft Standard
Pages
16
Obsoletes
RFC 2472
Updated by
RFC 8064
Copyright
✓ Free to read · Copied in full, as published

Where it comes from

RFC Editor · IETF Datatracker · IETF Trust Legal Provisions

Copied in full and unchanged from the RFC Editor, with the RFC's own notices. © IETF Trust and the persons identified as the document authors. The IETF Trust allows copying and distributing an RFC in full and without modification, so Micwyn shows it exactly as published and makes no study guide, audio or other version of it.

Discuss a passage

Select any passage in the reader and press Discuss to talk about it in public.

Join free to discuss a passage

Ask Micwyn about this book

Join (free) to ask about a PDF
Try asking

If you like this one