Technology and engineering · 2010
RFC 5786: Advertising a Router's Local Addresses in OSPF Traffic Engineering (TE) Extensions
by R. Aggarwal, K. Kompella
OSPF Traffic Engineering (TE) extensions are used to advertise TE Link State Advertisements (LSAs) containing information about TE-enabled links. The only addresses belonging to a router that are advertised in TE LSAs are the local addresses corresponding to TE-enabled links, and the local address corresponding to the Router ID. In order to allow other routers in a network to compute Multiprotocol Label Switching (MPLS) Traffic Engineered Label Switched Paths (TE LSPs) to a given router's local addresses, those addresses must also be advertised by OSPF TE. This document describes procedures that enhance OSPF TE to advertise a router's local addresses. [STANDARDS-TRACK]
Anyone can see what's on the shelves. Open a book with a free account, and stay in touch with its book club.
- First published
- 2010
- Status
- Proposed Standard
- Pages
- 7
- Updates
- RFC 3630
- Copyright
- ✓ Free to read · Copied in full, as published
Where it comes from
RFC Editor · IETF Datatracker · IETF Trust Legal Provisions
Copied in full and unchanged from the RFC Editor, with the RFC's own notices. © IETF Trust and the persons identified as the document authors. The IETF Trust allows copying and distributing an RFC in full and without modification, so Micwyn shows it exactly as published and makes no study guide, audio or other version of it.
Discuss a passage
Select any passage in the reader and press Discuss to talk about it in public.