Technology and engineering · 2010
RFC 5884: Bidirectional Forwarding Detection (BFD) for MPLS Label Switched Paths (LSPs)
by R. Aggarwal, K. Kompella, T. Nadeau et al.
One desirable application of Bidirectional Forwarding Detection (BFD) is to detect a Multiprotocol Label Switching (MPLS) Label Switched Path (LSP) data plane failure. LSP Ping is an existing mechanism for detecting MPLS data plane failures and for verifying the MPLS LSP data plane against the control plane. BFD can be used for the former, but not for the latter. However, the control plane processing required for BFD Control packets is relatively smaller than the processing required for LSP Ping messages. A combination of LSP Ping and BFD can be used to provide faster data plane failure detection and/or make it possible to provide such detection on a greater number of LSPs. This document describes the applicability of BFD in relation to LSP Ping for this application. It also describes procedures for using BFD in this environment. [STANDARDS-TRACK]
Anyone can see what's on the shelves. Open a book with a free account, and stay in touch with its book club.
Where it comes from
RFC Editor · IETF Datatracker · IETF Trust Legal Provisions
Copied in full and unchanged from the RFC Editor, with the RFC's own notices. © IETF Trust and the persons identified as the document authors. The IETF Trust allows copying and distributing an RFC in full and without modification, so Micwyn shows it exactly as published and makes no study guide, audio or other version of it.
Discuss a passage
Select any passage in the reader and press Discuss to talk about it in public.