Technology and engineering · 2011
RFC 6388: Label Distribution Protocol Extensions for Point-to-Multipoint and Multipoint-to-Multipoint Label Switched Paths
by IJ. Wijnands, I. Minei, K. Kompella et al.
This document describes extensions to the Label Distribution Protocol (LDP) for the setup of point-to-multipoint (P2MP) and multipoint-to-multipoint (MP2MP) Label Switched Paths (LSPs) in MPLS networks. These extensions are also referred to as multipoint LDP. Multipoint LDP constructs the P2MP or MP2MP LSPs without interacting with or relying upon any other multicast tree construction protocol. Protocol elements and procedures for this solution are described for building such LSPs in a receiver-initiated manner. There can be various applications for multipoint LSPs, for example IP multicast or support for multicast in BGP/MPLS Layer 3 Virtual Private Networks (L3VPNs). Specification of how such applications can use an LDP signaled multipoint LSP is outside the scope of this document. [STANDARDS-TRACK]
Anyone can see what's on the shelves. Open a book with a free account, and stay in touch with its book club.
- First published
- 2011
- Status
- Proposed Standard
- Pages
- 39
- Updated by
- RFC 7358
- Copyright
- ✓ Free to read · Copied in full, as published
Where it comes from
RFC Editor · IETF Datatracker · IETF Trust Legal Provisions
Copied in full and unchanged from the RFC Editor, with the RFC's own notices. © IETF Trust and the persons identified as the document authors. The IETF Trust allows copying and distributing an RFC in full and without modification, so Micwyn shows it exactly as published and makes no study guide, audio or other version of it.
Discuss a passage
Select any passage in the reader and press Discuss to talk about it in public.