Technology and engineering · 2011

RFC 6428: Proactive Connectivity Verification, Continuity Check, and Remote Defect Indication for the MPLS Transport Profile

by D. Allan, G. Swallow, J. Drake

Continuity Check, Proactive Connectivity Verification, and Remote Defect Indication functionalities are required for MPLS Transport Profile (MPLS-TP) Operations, Administration, and Maintenance (OAM). Continuity Check monitors a Label Switched Path for any loss of continuity defect. Connectivity Verification augments Continuity Check in order to provide confirmation that the desired source is connected to the desired sink. Remote Defect Indication enables an end point to report, to its associated end point, a fault or defect condition that it detects on a pseudowire, Label Switched Path, or Section. This document specifies specific extensions to Bidirectional Forwarding Detection (BFD) and methods for proactive Continuity Check, Continuity Verification, and Remote Defect Indication for MPLS-TP pseudowires, Label Switched Paths, and Sections using BFD as extended by this memo. [STANDARDS-

Anyone can see what's on the shelves. Open a book with a free account, and stay in touch with its book club.

First published
2011
Status
Proposed Standard
Pages
21
Updated by
RFC 7214
Copyright
✓ Free to read · Copied in full, as published

Where it comes from

RFC Editor · IETF Datatracker · IETF Trust Legal Provisions

Copied in full and unchanged from the RFC Editor, with the RFC's own notices. © IETF Trust and the persons identified as the document authors. The IETF Trust allows copying and distributing an RFC in full and without modification, so Micwyn shows it exactly as published and makes no study guide, audio or other version of it.

Discuss a passage

Select any passage in the reader and press Discuss to talk about it in public.

Join free to discuss a passage

Ask Micwyn about this book

Join (free) to ask about a PDF
Try asking

If you like this one