Technology and engineering · 2012

RFC 6550: RPL: IPv6 Routing Protocol for Low-Power and Lossy Networks

by T. Winter, P. Thubert, A. Brandt et al.

Low-Power and Lossy Networks (LLNs) are a class of network in which both the routers and their interconnect are constrained. LLN routers typically operate with constraints on processing power, memory, and energy (battery power). Their interconnects are characterized by high loss rates, low data rates, and instability. LLNs are comprised of anything from a few dozen to thousands of routers. Supported traffic flows include point-to-point (between devices inside the LLN), point-to-multipoint (from a central control point to a subset of devices inside the LLN), and multipoint-to-point (from devices inside the LLN towards a central control point). This document specifies the IPv6 Routing Protocol for Low-Power and Lossy Networks (RPL), which provides a mechanism whereby multipoint-to-point traffic from devices inside the LLN towards a central control point as well as point-to-multipoint traff

Anyone can see what's on the shelves. Open a book with a free account, and stay in touch with its book club.

First published
2012
Status
Proposed Standard
Pages
157
Copyright
✓ Free to read · Copied in full, as published

Where it comes from

RFC Editor · IETF Datatracker · IETF Trust Legal Provisions

Copied in full and unchanged from the RFC Editor, with the RFC's own notices. © IETF Trust and the persons identified as the document authors. The IETF Trust allows copying and distributing an RFC in full and without modification, so Micwyn shows it exactly as published and makes no study guide, audio or other version of it.

Discuss a passage

Select any passage in the reader and press Discuss to talk about it in public.

Join free to discuss a passage

Ask Micwyn about this book

Join (free) to ask about a PDF
Try asking

If you like this one