Technology and engineering · 2021

RFC 9117: Revised Validation Procedure for BGP Flow Specifications

by J. Uttaro, J. Alcaide, C. Filsfils et al.

This document describes a modification to the validation procedure defined for the dissemination of BGP Flow Specifications. The dissemination of BGP Flow Specifications as specified in RFC 8955 requires that the originator of the Flow Specification match the originator of the best-match unicast route for the destination prefix embedded in the Flow Specification. For an Internal Border Gateway Protocol (iBGP) received route, the originator is typically a border router within the same autonomous system (AS). The objective is to allow only BGP speakers within the data forwarding path to originate BGP Flow Specifications. Sometimes it is desirable to originate the BGP Flow Specification from any place within the autonomous system itself, for example, from a centralized BGP route controller. However, the validation procedure described in RFC 8955 will fail in this scenario. The modification

Anyone can see what's on the shelves. Open a book with a free account, and stay in touch with its book club.

First published
2021
Status
Proposed Standard
Pages
12
Updates
RFC 8955
Copyright
✓ Free to read · Copied in full, as published

Where it comes from

RFC Editor · IETF Datatracker · IETF Trust Legal Provisions

Copied in full and unchanged from the RFC Editor, with the RFC's own notices. © IETF Trust and the persons identified as the document authors. The IETF Trust allows copying and distributing an RFC in full and without modification, so Micwyn shows it exactly as published and makes no study guide, audio or other version of it.

Discuss a passage

Select any passage in the reader and press Discuss to talk about it in public.

Join free to discuss a passage

Ask Micwyn about this book

Join (free) to ask about a PDF
Try asking

If you like this one