Version 1
Nov 12, 2026. Compare with the current version · Version history
Mechanical energy is the energy an object or system has because of its motion and its position or shape: the sum of its kinetic energy and its potential energy.
In the standard formulation of the open university textbook University Physics (OpenStax, 2016), the sum of a particle's kinetic energy K and potential energy U is defined as its mechanical energy, E = K + U. Like all energy, it is measured in joules in the International System of Units.
The two parts
Kinetic energy is the energy of motion. For a particle of mass m moving at speed v, it is K = ½*mv*², measured in joules because its units are those of force times distance, the units of work. OpenStax's example: an 80 kg athlete running at 10 m/s has a kinetic energy of ½ × 80 × 10² = 4,000 J, or 4.0 kJ. Because speed depends on the frame of reference it is measured from, so does kinetic energy: a person walking along a moving subway car has one kinetic energy relative to the car, another relative to the tracks, and none relative to themselves.
Potential energy is energy stored in the arrangement of a system, defined through the work a force does. The difference in potential energy between two points is the negative of the work done by the force as the system moves from one to the other. Near Earth's surface, gravitational potential energy is U = mgy plus a constant, where g is the acceleration due to gravity (about 9.8 m/s²) and y is height. A spring stretched or compressed by a distance x stores U = ½*kx*² plus a constant, where k is the spring's stiffness.
The constant in each formula reflects a choice of where potential energy counts as zero. That choice is a matter of convenience, often the lowest height in a problem, and it must be stated and kept consistent; only differences in potential energy have physical meaning. The same is therefore true of a value of mechanical energy: it depends on the chosen zero of potential energy and on the frame in which speeds are measured, while changes in it do not depend on the zero.
Conservative and non-conservative forces
Whether mechanical energy stays constant depends on the forces at work. A force is called conservative when the work it does between two points is independent of the path taken; equivalently, it does no net work around any closed path. Gravity and the force of a spring are conservative. Friction and air resistance are not: the work they do depends on the path, and these dissipative forces take energy away from the system as it moves.
Conservation of mechanical energy
The principle that follows is the conservation of mechanical energy: the mechanical energy of a particle does not change if all the non-conservative forces acting on it do no work. When they do work, that work equals the change in mechanical energy, *W*nc = Δ*E*, and mechanical energy is not conserved.
A pendulum shows the first case. Neglecting air resistance, a pendulum bob trades potential energy for kinetic energy as it swings down and back again as it rises, with the sum unchanged. OpenStax works through a bob on a 1.0 m string released from rest at 30° from the vertical: equating the potential energy lost to the kinetic energy gained gives a speed at the lowest point of v = √(2*gL*(1 − cos θ)), or 1.62 m/s. The mass of the bob cancels out of the calculation.
A falling object with air resistance shows the second. In another OpenStax example, a 15 kg panel falls from a height of 1 km and strikes the ground at 45 m/s. Its starting mechanical energy, all potential, was 15 × 9.8 × 1,000 = 147,000 J; its kinetic energy on landing was ½ × 15 × 45² ≈ 15,000 J. The difference, about 130 kJ, is the energy taken out by air resistance.
Conservation of mechanical energy is therefore a special case: it holds only while friction, drag and other non-conservative forces do no work.
History of the idea
The concept grew out of a seventeenth-century dispute over how to measure the "force" of a moving body. René Descartes had held that the quantity of motion in the world remains constant, the quantity of motion of a body being its speed times its size. In 1686 Gottfried Wilhelm Leibniz published his Brief Demonstration of a Notable Error of Descartes and Others Concerning a Natural Law, arguing that Descartes's measure was inadequate; the paper began what became known as the vis viva controversy (Stanford Encyclopedia of Philosophy, revised 2024). Leibniz held that the proper measure was vis viva, "living force", the quantity *mv*², and that it was conserved in collisions.
The modern vocabulary came in the nineteenth century. Gaspard-Gustave de Coriolis, in his 1829 work Du calcul de l'effet des machines, is credited by the MacTutor History of Mathematics archive with introducing the terms "work" and "kinetic energy" with their present scientific meaning. In 1853 the Scottish engineer William John Macquorn Rankine distinguished "actual (or sensible) energy", among whose examples he counted the vis viva of moving matter, from "potential (or latent) energy", among whose examples was the mechanical power of gravitation, and assumed that the sum of the two across the universe was constant (Complete Dictionary of Scientific Biography). The Dictionary calls "potential energy" one of the terms Rankine invented for new concepts. A study by Joel White for the Energy and Philosophy project notes that Rankine's "potential" and "actual" energy predated the pairing of "potential" and "kinetic" that became standard.
Uses
Mechanical energy is stored and recovered on a large scale. Pumped storage hydropower uses two water reservoirs at different elevations: electricity is used to pump water up to the higher reservoir, storing gravitational potential energy, and the water is later released downhill through turbines to generate electricity again. According to the U.S. Department of Energy, citing its 2024 Hydropower Market Report, pumped storage accounted for 88 percent of all utility-scale energy storage in the United States.
Sources
- William Moebs, Samuel J. Ling and Jeff Sanny, University Physics, Volume 1, OpenStax, Rice University, 2016: section 7.2, "Kinetic Energy". openstax.org/books/university-physics-volume-1/pages/7-2-kinetic-en…
- Same, section 8.1, "Potential Energy of a System". openstax.org/books/university-physics-volume-1/pages/8-1-potential-…
- Same, section 8.2, "Conservative and Non-Conservative Forces". openstax.org/books/university-physics-volume-1/pages/8-2-conservati…
- Same, section 8.3, "Conservation of Energy". openstax.org/books/university-physics-volume-1/pages/8-3-conservati…
- Jeffrey K. McDonough, "Leibniz's Philosophy of Physics", Stanford Encyclopedia of Philosophy, first published 17 December 2007, substantive revision 26 July 2024. plato.stanford.edu/entries/leibniz-physics/
- J. J. O'Connor and E. F. Robertson, "Gaspard Gustave de Coriolis", MacTutor History of Mathematics archive, University of St Andrews, July 2000. mathshistory.st-andrews.ac.uk/Biographies/Coriolis/
- "Rankine, William John Macquorn", Complete Dictionary of Scientific Biography, Charles Scribner's Sons, 2008, via Encyclopedia.com. encyclopedia.com/people/science-and-technology/technology-biographi…
- Joel White, "Actual and Virtual Energy: From Aristotle to Rankine and Back Again", Energy and Philosophy project, last modified 5 August 2024. energy-philosophy.ac.uk/?p=94
- U.S. Department of Energy, Water Power Technologies Office, "Pumped Storage Hydropower", accessed 12 November 2026. energy.gov/eere/water/pumped-storage-hydropower