Technology and engineering · 2007
RFC 4811: OSPF Out-of-Band Link State Database (LSDB) Resynchronization
by L. Nguyen, A. Roy, A. Zinin
OSPF is a link-state intra-domain routing protocol used in IP networks. Link State Database (LSDB) synchronization in OSPF is achieved via two methods -- initial LSDB synchronization when an OSPF router has just been connected to the network and asynchronous flooding that ensures continuous LSDB synchronization in the presence of topology changes after the initial procedure was completed. It may sometime be necessary for OSPF routers to resynchronize their LSDBs. The OSPF standard, however, does not allow routers to do so without actually changing the topology view of the network. This memo describes a vendor-specific mechanism to perform such a form of out-of-band LSDB synchronization. The mechanism described in this document was proposed before Graceful OSPF Restart, as described in RFC 3623, came into existence. It is implemented/supported by at least one major vendor and is currently
Anyone can see what's on the shelves. Open a book with a free account, and stay in touch with its book club.
- First published
- 2007
- Status
- Informational
- Pages
- 10
- Updated by
- RFC 9454
- Copyright
- ✓ Free to read · Copied in full, as published
Where it comes from
RFC Editor · IETF Datatracker · IETF Trust Legal Provisions
Copied in full and unchanged from the RFC Editor, with the RFC's own notices. © IETF Trust and the persons identified as the document authors. The IETF Trust allows copying and distributing an RFC in full and without modification, so Micwyn shows it exactly as published and makes no study guide, audio or other version of it.
Discuss a passage
Select any passage in the reader and press Discuss to talk about it in public.