Technology and engineering · 2007

RFC 4812: OSPF Restart Signaling

by L. Nguyen, A. Roy, A. Zinin

OSPF is a link-state intra-domain routing protocol used in IP networks. Routers find new and detect unreachable neighbors via the Hello subprotocol. Hello OSPF packets are also used to ensure two-way connectivity within time. When a router restarts its OSPF software, it may not know its neighbors. If such a router sends a Hello packet on an interface, its neighbors are going to reset the adjacency, which may not be desirable in certain conditions. This memo describes a vendor-specific mechanism that allows OSPF routers to inform their neighbors about the restart process. Note that this mechanism requires support from neighboring routers. The mechanism described in this document was proposed before Graceful OSPF Restart, as described in RFC 3623, came into existence. It is implemented/supported by at least one major vendor and is currently deployed in the field. The purpose of this docume

Anyone can see what's on the shelves. Open a book with a free account, and stay in touch with its book club.

First published
2007
Status
Informational
Pages
7
Copyright
✓ Free to read · Copied in full, as published

Where it comes from

RFC Editor · IETF Datatracker · IETF Trust Legal Provisions

Copied in full and unchanged from the RFC Editor, with the RFC's own notices. © IETF Trust and the persons identified as the document authors. The IETF Trust allows copying and distributing an RFC in full and without modification, so Micwyn shows it exactly as published and makes no study guide, audio or other version of it.

Discuss a passage

Select any passage in the reader and press Discuss to talk about it in public.

Join free to discuss a passage

Ask Micwyn about this book

Join (free) to ask about a PDF
Try asking

If you like this one