Technology and engineering · 2016
RFC 7821: UDP Checksum Complement in the Network Time Protocol (NTP)
by T. Mizrahi
The Network Time Protocol (NTP) allows clients to synchronize to a time server using timestamped protocol messages. To facilitate accurate timestamping, some implementations use hardware-based timestamping engines that integrate the accurate transmission time into every outgoing NTP packet during transmission. Since these packets are transported over UDP, the UDP Checksum field is then updated to reflect this modification. This document proposes an extension field that includes a 2-octet Checksum Complement, allowing timestamping engines to reflect the checksum modification in the last 2 octets of the packet rather than in the UDP Checksum field. The behavior defined in this document is interoperable with existing NTP implementations.
Anyone can see what's on the shelves. Open a book with a free account, and stay in touch with its book club.
- First published
- 2016
- Status
- Experimental
- Pages
- 14
- Updated by
- RFC 9748
- Copyright
- ✓ Free to read · Copied in full, as published
Where it comes from
RFC Editor · IETF Datatracker · IETF Trust Legal Provisions
Copied in full and unchanged from the RFC Editor, with the RFC's own notices. © IETF Trust and the persons identified as the document authors. The IETF Trust allows copying and distributing an RFC in full and without modification, so Micwyn shows it exactly as published and makes no study guide, audio or other version of it.
Discuss a passage
Select any passage in the reader and press Discuss to talk about it in public.