Iron
A metallic element, atomic number 26, mined as ore and smelted into pig iron and steel
🚧 Under construction This entry is still being built. What is here has been checked against its sources, but more sections are coming.
A metallic element, atomic number 26, mined as ore and smelted into pig iron and steel
🚧 Under construction This entry is still being built. What is here has been checked against its sources, but more sections are coming.
Iron is the chemical element with atomic number 26 and the symbol Fe, a metal that is mined as ore and smelted into pig iron and steel, the most widely used metal products.[1][3]
Iron's standard atomic weight, as tabulated by the U.S. National Institute of Standards and Technology (NIST), is 55.845(2), where the digits in brackets give the uncertainty in the last place.[1] Natural iron is a mixture of four isotopes, which are forms of the element with the same number of protons but different numbers of neutrons.[1] NIST lists their shares of natural iron as follows:[1]
| Isotope | Share of natural iron | Relative atomic mass |
|---|---|---|
| Iron-54 | 5.845% | 53.9396 |
| Iron-56 | 91.754% | 55.9349 |
| Iron-57 | 2.119% | 56.9354 |
| Iron-58 | 0.282% | 57.9333 |
Iron-56 therefore makes up more than nine in ten iron atoms in nature.[1] The shares sum to 100%, using NIST's tabulated values.[1]
The only source of primary iron, meaning iron not recovered from scrap, is iron ore.[2] The U.S. Geological Survey (USGS) describes iron as abundant in nature but not in useful metallic form: an iron ore is a natural iron-bearing mineral containing enough iron to be commercially usable, and the metal must be extracted from it.[4] Ore reaches steelmakers directly as shipping ore or after processing into concentrates, pellets, sinter, briquettes, direct-reduced iron or iron nuggets.[2]
The USGS Mineral Commodity Summaries 2026, published in February 2026, estimates world mine production of iron ore at about 2.6 billion metric tons of usable ore in both 2024 and 2025, containing about 1.6 billion tons of iron, which is roughly 62% iron by weight.[2] Production is concentrated in a few countries.[2] USGS estimates for 2025, in millions of metric tons of usable ore, are:[2]
| Country | Usable ore, 2025 (estimate) | Share of world total |
|---|---|---|
| Australia | 980 | about 38% |
| Brazil | 420 | about 16% |
| India | 310 | about 12% |
| China | 290 | about 11% |
| Russia | 86 | about 3% |
| United States | 38 | about 1.5% |
The shares are this entry's own division of each figure by the rounded world total of 2,600 million tons.[2] Australia and Brazil together account for about 54% of the world's usable ore on that basis.[2] The USGS also gives iron content separately; for Australia it is an estimated 600 million tons in 2025.[2]
USGS estimates world reserves at 200 billion tons of crude ore, containing 87 billion tons of iron.[2] Australia (27 billion tons of iron content), Brazil (15 billion) and Russia (14 billion) hold the largest reserves by that measure.[2] It estimates world resources at more than 900 billion tons of ore containing more than 260 billion tons of iron.[2]
Steel is iron combined with a small amount of carbon.[4] The USGS reports iron and steel output as pig iron and raw steel, and integrated mills produce both.[3] The USGS states that iron and steel make up about 95% of all the tonnage of metal produced each year in the United States and the world.[4] It describes iron as the least expensive and most widely used metal, which competes in most applications with cheaper non-metallic materials or with dearer materials that offer better performance, such as aluminium, plastics, concrete and wood.[3]
USGS estimates world raw steel production at about 1.9 billion metric tons in both 2024 and 2025, and world pig iron production at about 1.3 billion tons in 2025.[3] The 2025 estimates for the largest producers, in millions of metric tons, are:[3]
| Country | Pig iron, 2025 (estimate) | Raw steel, 2025 (estimate) |
|---|---|---|
| China | 830 | 980 |
| India | 98 | 160 |
| Japan | 59 | 81 |
| United States | 21 | 82 |
| Russia | 47 | 65 |
| Korea, Republic of | 41 | 60 |
China's 980 million tons of raw steel is about 52% of the 1,900 million world total, and its 830 million tons of pig iron is about 64% of the 1,300 million world total, by this entry's division of the USGS figures.[3] The USGS notes that direct-reduced iron and scrap are extensively used for steelmaking in electric arc furnaces.[2] In the United States, where raw steel output of 82 million tons in 2025 is about four times pig iron output of 21 million, USGS reports that in the United States 47 companies operated 102 electric-arc minimills in 2025, and that integrated mills, which smelt ore into pig iron, accounted for approximately 28% of domestic steel production.[3]
The USGS notes that thousands of iron and steel products are made by casting, forging and rolling, and that for some purposes, such as the steel framing of large buildings, no other material is suitable because of strength requirements.[4] In the United States in 2025, construction accounted for an estimated 31% of net shipments of steel mill products, steel service centers and distributors 26%, automotive 15% and steel for converting and processing 11%, with all other uses making up the remaining 17%.[3]